NJMEP

Team Effectiveness & Team Building
2022-12-07 08:30 - 12:30 (America/New_York) | Online
This half day virtual workshop provides participants training in team building and team effectiveness. Team Building & Effectiveness is most often a precursor to a focused team based effort to address specific business areas, or an integral part of a more comprehensive business improvement strategy. During the class, basic team concepts are covered including, but not limited to stages of team development, roles and responsibilities, ground rules for acceptable team behavior and team decision making processes.
Teams have become a principal building block of the strategy of successful organizations. Whether the focus is on service, quality, cost, value, speed, efficiency, performance, or other similar goals, teams are the central methodology of most organizations in the private, non-profit, and government sectors.
In most teams, the energies of individual members work at cross purposes. Individuals may work extraordinarily hard, but their efforts do not translate into team effort, and this results in wasted energy. By contrast, when a team becomes more aligned, a commonality of direction emerges, and individual energies harmonize. You have a shared vision and an understanding of how to complement each others’ efforts.

Food Safety - Corrective Action (CA) and Root Cause Analysis (RCA)
2022-12-07 08:30 - 17:00 (America/New_York) | NJMEP North 2 Ridgedale Ave, Suite 305, Cedar Knolls, NJ 07927, 2 Ridgedale Ave, Cedar Knolls, NJ, 07927, United States
12/7, 12/8/2022
Corrective action (CA) and root cause analysis (RCA) are essential methodologies to address systemic problems in food manufacturing and is designed to improve the effectiveness of procedures in food safety management systems (FSMS).
In the first part of the training class, participants will learn the common methodologies of RCA within the food industry (fishbone diagram, 5 why’s etc.) and how to apply them during applicable case studies and practical exercises within a food manufacturing operation.
The second part of the training class will focus on the implementation of an effective corrective action and preventive action (CAPA) processes including methodologies and evaluation of effectiveness that are applicable to different supply communication channels within the food industry, i.e. online process vs. in person plan operations.
By the end of this training course, participants will be able to:
* Explain the objectives of root cause analysis as a procedure to find and evaluate the causes of problems within the food industry
* Use problem cause data collection tools applicable to food manufacturing
* Apply appropriate root cause analysis tools to food manufacturing
* Develop efficient corrective action and preventative action plans for food manufacturing
* Understand and be able to apply how CA, CAPA, and RCA are all managed under FSMS.
The participant will receive a certificate of successful completion for the course after passing a written knowledge test following the training course.
The course is designed for:
Operations Staff in food and beverage manufacturing, packaging, holding, handling, and distributors. This can include the following but is not limited to: Logistics, Process Engineers, Quality Engineers, Plant Managers, Supervisors, Food Safety Manager, Quality Assurance Manager.

OSHA 10-Hour Card Training
2022-12-07 08:30 - 17:00 (America/New_York) | NJMEP North 2 Ridgedale Ave, Suite 305, Cedar Knolls, NJ 07927, 2 Ridgedale Ave, Cedar Knolls, NJ, 07927, United States
12/7 8hrs + 12/8 4hrs
OSHA is the Occupational Safety and Health Administration and is responsible for worker safety and health protection.
Since its inception in 1970, OSHA has cut the work-fatality rate by more than half, reduced the overall injury and illness rates in industries where OSHA has concentrated its attention, virtually eliminated brown lung disease in the textile industry and reduced trenching and excavation fatalities by 35 percent.
OSHA is administered through the Department of Labor (DOL). The DOL regulates and enforces more than 180 federal laws. These mandates and the regulations that implement them cover many workplace activities for about 10 million employers and 125 million workers.
OSHA 10-hour training is the primary method used to train workers on hazard recognition and OSHA safety standards. The OSHA 10-hour course for the general industry is for workers who have jobs related to health care, electrical, factory, warehouse, manufacturing, storage and more. This OSHA course covers general industry hazards not specific to those working construction-only jobs. Our OSHA 10-Hour Training course is designed to teach workplace safety and reduce jobsite hazards. Workers will learn about hazard avoidance, workers’ rights, filing an OSHA Complaint and more.
With successful completion of the class, participants receive an OSHA construction safety and health 10- hour course completion card.

Manufacturing Industry Update: The Rewards of Agility
2022-12-07 11:00 - 12:00 (America/New_York) | NJ
Citrin Cooperman’s 2022 Manufacturing and Distribution Pulse Survey reports on the pulse of industry company leaders as they measure the health of their businesses and take stock of future priorities, concerns, and challenges. Join us as we reveal this year’s results on how agile businesses are navigating industry issues and how manufacturing companies in New Jersey can leverage these best practices.

Virtual - Basic Material Handling and Ergonomics
2022-12-08 08:30 - 12:30 (America/New_York) | Online
“Work shouldn’t hurt” How to work safely and minimize the possibility of Muscular Skeletal Disorders (MSDs) later in life.
In this training we will discuss:
• The different categories of MSDs and how to avoid them.
• Proper
 Lifting,
 Twisting,
 Standing,
 Sitting
 Bending,
• Proper use of mechanical equipment:
 Fork Trucks,
 Overhead Cranes
 Rigging slings

4th Quarter Holiday Resource Dinner
2022-12-08 17:30 - 20:00 (America/New_York) | Ravello’s, 138 Eagle Rock Ave, East Hanover, 07936, United States
Content is protected.

Time Management and Delegation
2022-12-13 08:30 - 12:30 (America/New_York) | Online
This course includes pre-work of completing a weekly activity log.
Purpose:
Time management skills are essential for achieving results. This course provides the
tools to set priorities and be more effective and productive.
Course Objectives:
Upon completion of this course, the participant will be able to:
• Analyze time for ways to become more effective
• Identify common time wasters and develop strategies to overcome them
• Categorize tasks that can be delegated and an approach to successful delegation
Topics Covered Include:
• Benefits of Effective Time Management
• Common Time Wasters
• Overcoming Procrastination
• Eisenhower Urgent-Important Matrix
• Meeting Effectiveness
• Saying “No”
• The What and the How of Delegation

Lean Six Sigma Yellow Belt Training
2022-12-13 08:30 - 12:30 UTC | NJ
12/13 + 12/16/2022
Lean Six Sigma Yellow Belt is the first step of Lean Six Sigma training.
In this 8-hour introductory classroom course you will follow the DMAIC methodology (Define, Measure, Analyze, Improve, and Control) while learning the various Lean and Six Sigma tools necessary to perform at a Yellow Belt level on a project team. This course is suited to those just entering the Lean Six Sigma arena as well as those preparing for Yellow Belt certification.
Learning Objectives
Upon completion, students will be able to:
• Explain the key phases of the DMAIC methodology (Define, Measure, Analyze, Improve and Control)
• Distinguish between Lean and Six Sigma
• Describe the use of key tools such as Project Charter, SIPOC, 5S, TIMWOOD, Standard Work, 5WHYs, Fishbone Diagram and more
• Apply knowledge to solve simple “IMPLEMENT” level projects
Yellow Belt curriculum focuses on:
• Introduction to Lean Six Sigma
• 3i Model
• Problem Statement and Project Charter
• Process Mapping
• Baseline Performance
• Root Cause Investigation
• Improving processes
• Tollgate review, KPIs and Best Practices
• Control Plans, Sustaining the gains and the CI program

FSPCA - FSVP (Foreign Supplier Verification Programs)
2022-12-13 08:30 - 17:00 (America/New_York) | NJMEP North 2 Ridgedale Ave, Suite 305, Cedar Knolls, NJ 07927, 2 Ridgedale Ave, Cedar Knolls, NJ, 07927, United States
12/13, 12/14/2022
The following course will provide the knowledge to implement the requirements of the Foreign Supplier Verification Programs for importers of food for humans and animals.
This course will provide participants with the knowledge to implement the requirements of the “Foreign Supplier Verification Programs (FSVP) for Importers of Food for Humans and Animals” regulation of the U.S. Food and Drug Administration (FDA). This regulation is one of a number of regulations and guidance that implement the provisions of the 2011 Food Safety Modernization Act (FSMA), which focuses on safe food practices.
The FSVP curriculum was designed by regulatory, academia, and industry professionals and developed with funding from FDA as part of the FSPCA. Attending this course will help you understand the FSVP requirements and how those requirements can be met in your particular circumstance.
By the end of this training course, participants will be able to:
Build the foundation for the FSVP process in which importers can evaluate products and supplies to against the verification requirements.
Conduct supplier verification activities (i.e. hazard analysis, evaluation, and approvals, establish written procedures, implement corrective actions- if needed)
How to keep required records and documentation
How to identify the FSVP importer at entry
Understand the FDA’s regulation in detail to effectively implement compliance, including key differences between standard, modified, and exempt requirements.
This will be delivered by Lead Instructor (certificate #240a5299) for the FSPCA FSVP Course. In addition to the FSPCA course completion requirements, our delivery will require passing an exam, then the participant will receive a certificate.

Fundamentals of Continuous Improvement
2022-12-13 12:30 - 16:30 (America/New_York) | Online
12/13 & 12/14/22
This workshop provides an understanding of core philosophy of Continuous Improvement, its application, and strategies to implement it into practice. This workshop features interactive learning session and guided presentation including exercises and discussion.
Participants will be able to:
• Distinguish between innovative and continuous improvement
• Understand how quality and value are defined
• Identify and apply a fundamental process of improvement
• Understand and apply cultural and process factors that bolster Continuous Improvement
• Understand the three major wastes and the 8 Deadly Wastes
• Implement the PDCA cycle to their work
Topics covered include:
• The fundamental philosophy and mechanism of improvement
• Improve or die – Continuous Improvement as a survival strategy
• Customer Perspective as a driver of Continuous Improvement
• Establishing and maintaining a culture of improvement
• Continuous Improvement through problem solving
• The mitigation of waste and obstacles
• Key Principles in establishing robust Continuous Improvement

Project Management Essentials
2022-12-14 08:30 - 17:00 (America/New_York) | NJMEP North 2 Ridgedale Ave, Suite 305, Cedar Knolls, NJ 07927, 2 Ridgedale Ave, Cedar Knolls, NJ, 07927, United States
12/14 & 12/15/22
The organization is continually required to complete time-phased work activities to solve a problem, correct a situation or create a unique product or process. The tool typically used to accomplish that is a project. The project results in a successful outcome when planned and managed appropriately. Project planning and management to success is not rocket science. It is accomplished using common sense and determination.
This course is a comprehensive, practical discussion on how to realistically plan a project to ensure success and how to skillfully manage its progress to completion in the time predicted.
Course Outline – Project Management Essentials
• The nature of projects and why they are initiated
• How projects solve organizational obstructions
• Easily describe the needed organization solution or deliverable
• Outline the minimum deliverable success requirements
• Identify the necessary work to create the deliverables
• Logically sequence the work
• How to realistically estimate the time required to complete the work
• Issuing a practical project schedule
• How to assess corporate sensitivity to project cost
• Introducing quality in the project
• Effectively recruit project team members
• Practically manage project human resources
• Efficiently manage project communications
• Practically manage stakeholder expectations
• Easily monitor project progress
• Best practices in keeping the project on time
• Effectively rescue the project running late
This course is for project team members who wish to add to their skills, individuals looking to enhance their understanding and management of projects and executives who manage projects performed by others. Anyone taking this course will gain powerful insight into projects and project management.

Virtual - Addressing Capital Needs in Challenging Times
2022-12-14 11:00 - 12:00 UTC | NJ
DBD Partners is a boutique investment bank that provides Bulge Bracket level investment banking services. DBD is the lower middle market leader in providing IB services for both capital formation – raising the right amount and structure of debt/equity to fund growth (new facilities, equipment, working capital or acquisitions) as well as balance sheet restructuring – negotiating with current debt holders and recalibrating your capital structure to facilitate reaching your goals. However complex your situation is, we have seen it before and have a solution. We take care of every step of the process, from building the initial documents to handling the due diligence process to negotiating deal specifics. Our extensive network of capital and debt providers, complemented by our rigorous process and leadership by senior bankers from start to finish, has led to a high close rate on engaged deals and a lengthy list of satisfied clients. If you are looking to raise capital for growth or restructuring, please join us for our webinar at 11AM on December 14.
A recording of the webinar is available now! Please fill out the form below to access the video:

Name(Required)

First

Last

Company(Required)Address(Required)

Street Address

Address Line 2

City

State / Province / Region

ZIP / Postal Code

AfghanistanAlbaniaAlgeriaAmerican SamoaAndorraAngolaAnguillaAntarcticaAntigua and BarbudaArgentinaArmeniaArubaAustraliaAustriaAzerbaijanBahamasBahrainBangladeshBarbadosBelarusBelgiumBelizeBeninBermudaBhutanBoliviaBonaire, Sint Eustatius and SabaBosnia and HerzegovinaBotswanaBouvet IslandBrazilBritish Indian Ocean TerritoryBrunei DarussalamBulgariaBurkina FasoBurundiCabo VerdeCambodiaCameroonCanadaCayman IslandsCentral African RepublicChadChileChinaChristmas IslandCocos IslandsColombiaComorosCongoCongo, Democratic Republic of theCook IslandsCosta RicaCroatiaCubaCuraçaoCyprusCzechiaCôte d'IvoireDenmarkDjiboutiDominicaDominican RepublicEcuadorEgyptEl SalvadorEquatorial GuineaEritreaEstoniaEswatiniEthiopiaFalkland IslandsFaroe IslandsFijiFinlandFranceFrench GuianaFrench PolynesiaFrench Southern TerritoriesGabonGambiaGeorgiaGermanyGhanaGibraltarGreeceGreenlandGrenadaGuadeloupeGuamGuatemalaGuernseyGuineaGuinea-BissauGuyanaHaitiHeard Island and McDonald IslandsHoly SeeHondurasHong KongHungaryIcelandIndiaIndonesiaIranIraqIrelandIsle of ManIsraelItalyJamaicaJapanJerseyJordanKazakhstanKenyaKiribatiKorea, Democratic People's Republic ofKorea, Republic ofKuwaitKyrgyzstanLao People's Democratic RepublicLatviaLebanonLesothoLiberiaLibyaLiechtensteinLithuaniaLuxembourgMacaoMadagascarMalawiMalaysiaMaldivesMaliMaltaMarshall IslandsMartiniqueMauritaniaMauritiusMayotteMexicoMicronesiaMoldovaMonacoMongoliaMontenegroMontserratMoroccoMozambiqueMyanmarNamibiaNauruNepalNetherlandsNew CaledoniaNew ZealandNicaraguaNigerNigeriaNiueNorfolk IslandNorth MacedoniaNorthern Mariana IslandsNorwayOmanPakistanPalauPalestine, State ofPanamaPapua New GuineaParaguayPeruPhilippinesPitcairnPolandPortugalPuerto RicoQatarRomaniaRussian FederationRwandaRéunionSaint BarthélemySaint Helena, Ascension and Tristan da CunhaSaint Kitts and NevisSaint LuciaSaint MartinSaint Pierre and MiquelonSaint Vincent and the GrenadinesSamoaSan MarinoSao Tome and PrincipeSaudi ArabiaSenegalSerbiaSeychellesSierra LeoneSingaporeSint MaartenSlovakiaSloveniaSolomon IslandsSomaliaSouth AfricaSouth Georgia and the South Sandwich IslandsSouth SudanSpainSri LankaSudanSurinameSvalbard and Jan MayenSwedenSwitzerlandSyria Arab RepublicTaiwanTajikistanTanzania, the United Republic ofThailandTimor-LesteTogoTokelauTongaTrinidad and TobagoTunisiaTurkmenistanTurks and Caicos IslandsTuvaluTürkiyeUS Minor Outlying IslandsUgandaUkraineUnited Arab EmiratesUnited KingdomUnited StatesUruguayUzbekistanVanuatuVenezuelaViet NamVirgin Islands, BritishVirgin Islands, U.S.Wallis and FutunaWestern SaharaYemenZambiaZimbabweÅland Islands
Country

Website(Required)

Phone(Required)Email(Required)

Virtual - How to Secure Tax Credits & Incentives; R&D + EPAct 179D + Cost Segreg
2022-12-14 14:00 - 15:00 (America/New_York) | NJ
Webinar for NJMEP clients to learn about How to Secure Tax Credits and Incentives such as R&D Tax credits, EPAct 179D and Cost Segregation. There are countless challenges, and one big issue is having a lack of cash on hand. We will be discussing strategies to help New Jersey manufacturers secure more capital in a time where nearly everyone is struggling to keep their doors open and see R&D Tax Credits as a valuable option. Manufacturers are surprised to find out how many of their day-to-day activities can be considered R&D. We will discuss the EPAct 179D Tax Deductions for energy efficiency projects. Also covered during this webinar will be Cost Segregation for new construction and renovations.
Sign up for our webinar and find out what kind of capital you might expect to secure or learn how simple securing your Tax Credits can be with the right team behind you.

DoD Cybersecurity - Are You Meeting Current CMMC Requirements?
2022-12-15 13:00 - 14:00 (America/New_York) | Online
DoD Cybersecurity – Are You Meeting Current CMMC Requirements?
Join NJMEP for a brief webinar to discuss the current CMMC changes.
Learn how these changes impact you and what you need to get DoD contracts, including:
• The notable changes to CMMC 2.0 and why they matter.
• Your current DFARS Requirements
• How DIB contractors can prepare for these upcoming changes.
• Future planning to get, and remain, in compliance.
Every manufacturer in the Defense Industrial Base must be compliant with CMMC Version 2.0 Update within the next few months. The time is now to prepare for stricter data protection regulations that will be required in your contracts. This cyber security program not only is required for DoD business you will have an enhanced environment to gain the trust of customers and increase your revenue.
The CMMC 2.0 is the most recent version of the DoD’s Cybersecurity Maturity Model Certification (CMMC). Built on a foundation of NIST SP 800-171, the CMMC 2.0 establishes three certification levels that reflect the maturity and reliability of a company’s cybersecurity infrastructure to safeguard sensitive government information on the contractors’ systems. Under CMMC, a contractor must be certified to be eligible to bid on, win or participate on a contract.
Without a valid CMMC certification the prime and/or sub will be barred from the contract (May 2023 is the target date for contract inclusion). Unlike previous requirements to be NIST SP 800-171 compliant, under CMMC the contractor can NOT self-certify.

CNC (Computerized Numerical Control) Training - North
2022-12-19 08:30 - 17:00 (America/New_York) | NJMEP North 2 Ridgedale Ave, Suite 305, Cedar Knolls, NJ 07927, 2 Ridgedale Ave, Cedar Knolls, NJ, 07927, United States
12/19, 12/20, 12/21/2022
Upon completion of this three day course students will have a deep understanding on CNC milling setup and programing. This course will cover the following modules; 1. Milling Tools, Material.
o Tool geometry, endmill types and uses
o Material consideration in milling. Introduction to feeds and speeds
2. Mill Work Holding
o Introduction to different types of work holding (vises, clamps, and magnetic plates) and their uses in CNC milling
3. CNC Mill setup
o Familiarize the students with CNC Mill setup which includes reading and understanding the setup sheet, machine Power Up, jogging the machine, loading cutting tools in the tool changer, setting the work offsets, setting the tool length offset, loading, checking, and running the program
4. CNC Programing
o Understanding absolute and incremental positioning
o Introduction to CNC G codes (G00, G01) linear interpolation and circular interpolation
o Preparatory G codes
 Inch / Metric Selection (G20, G21)
 Work Coordinate Selection (G54-59)
 Tool Length Compensation (G43)
 Reference point and return (G28)
 Another way to return to machine zero (G53)
 Circular Plane Selection (G17, G18, G19)
o Miscellaneous M codes
o Program format
5. Canned cycles
o Drilling canned cycles
o Circular pocket Milling
6. Cutter compensation (G40, G41, G42)

First Aid Training - CPR AED
2022-12-20 08:30 - 12:30 (America/New_York) | Auto Drill, 8 Bartles Corner Road, Unit 107, Flemington, NJ, 08822, United States

Food Safety - SQF Practitioner
2022-12-20 08:30 - 17:00 (America/New_York) | NJ
12/20/22 & 12/21/2022
As consumers become more self-educated about how products are being produced from product ingredients to safe food handling practices, retailers are depending on suppliers to have food safety controls in place to give reassurance to consumers that Good Manufacturing Practices (GMP) are effective and Food Safety Principles are being followed. This is when a Safe Quality Food Practitioner comes into place. A SQF (Safe Quality Food) Practitioner is one who develops, implements and maintains a SQF system for a supplier.
The participant will receive a certificate for successfully completion of the training after passing the written knowledge test at the end of the training class.

SQF Practitioner
2022-12-20 08:30 - 17:00 (America/New_York) | NJMEP North 2 Ridgedale Ave, Suite 305, Cedar Knolls, NJ 07927, 2 Ridgedale Ave, Cedar Knolls, NJ, 07927, United States
As consumers become more self-educated about how products are being produced from product ingredients to safe food handling practices, retailers are depending on suppliers to have food safety controls in place to give reassurance to consumers that Good Manufacturing Practices (GMP) are effective and Food Safety Principles are being followed. This is when a Safe Quality Food Practitioner comes into place. A SQF (Safe Quality Food) Practitioner is one who develops, implements and maintains a SQF system for a supplier.
The participant will receive a certificate for successfully completion of the training after passing the written knowledge test at the end of the training class.

First Aid Training - CPR AED
2022-12-20 13:00 - 17:00 UTC | NJ

Food Safety - Corrective Action (CA) and Root Cause Analysis (RCA)
2023-01-03 08:30 - 17:00 (America/New_York) | Union Beverage Packers, LLC, 600 N Union Ave, Hillside, NJ, 07205, United States

Food Safety - cGMP (Current Good Manufacturing Practices) Requirements and Readi
2023-01-05 08:30 - 17:00 (America/New_York) | Union Beverage Packers, LLC, 600 N Union Ave, Hillside, NJ, 07205, United States

Food Safety - Cleaning & Sanitation
2023-01-06 08:30 - 17:00 (America/New_York) | Union Beverage Packers, LLC, 600 N Union Ave, Hillside, NJ, 07205, United States

Microsoft PowerPoint Training
2023-01-10 08:30 - 17:00 (America/New_York) | NJMEP North 2 Ridgedale Ave, Suite 305, Cedar Knolls, NJ 07927, 2 Ridgedale Ave, Cedar Knolls, NJ, 07927, United States
This Microsoft PowerPoint training class covers a broad range of topics to help you learn how to design an effective presentation utilizing various techniques and special effects.
Learn how to use Microsoft PowerPoint and the rich functionality it offers to create presentations with an impact. Students will create graphs, work with text, drawings, clip art, and colors; use masters and templates; and use slide show transitions and special effects.
Students will need to bring a laptop to this live training class.

CNC (Computerized Numerical Control) Training - South
2023-01-11 08:30 - 17:00 (America/New_York) | NJMEP South, 211 Benigno Blvd, Bellmawr, NJ, 08031, United States
1/11, 1/12, 1/13/2023
Upon completion of this three day course students will have a deep understanding on CNC milling setup and programing. This course will cover the following modules;
1. Milling Tools, Material.
o Tool geometry, endmill types and uses
o Material consideration in milling. Introduction to feeds and speeds
2. Mill Work Holding
o Introduction to different types of work holding (vises, clamps, and magnetic plates) and their uses in CNC milling
3. CNC Mill setup
o Familiarize the students with CNC Mill setup which includes reading and understanding the setup sheet, machine Power Up, jogging the machine, loading cutting tools in the tool changer, setting the work offsets, setting the tool length offset, loading, checking, and running the program
4. CNC Programing
o Understanding absolute and incremental positioning
o Introduction to CNC G codes (G00, G01) linear interpolation and circular interpolation
o Preparatory G codes
 Inch / Metric Selection (G20, G21)
 Work Coordinate Selection (G54-59)
 Tool Length Compensation (G43)
 Reference point and return (G28)
 Another way to return to machine zero (G53)
 Circular Plane Selection (G17, G18, G19)
o Miscellaneous M codes
o Program format
5. Canned cycles
o Drilling canned cycles
o Circular pocket Milling
6. Cutter compensation (G40, G41, G42)

Recession Proofing Your Manufacturing Business
2023-01-11 13:00 - 14:30 (America/New_York) | Online
Inflation is up, the stock market is down, and interest rates are rising – we’re experiencing a recession. No one likes an economic downturn, but being prepared can
help you to not only survive but thrive in turbulent times.
It is important for business owners to be proactive, creative, and flexible; especially in these times of uncertainty. We will share proven tactics and strategies for playing offense (sales/marketing) and defense (finance and operations). Topics covered include identifying key trends, evaluating opportunities, mitigating risk, and managing cash flow.

Principles of Lean Manufacturing with Live Simulation - Live South
2023-01-12 08:30 - 17:00 (America/New_York) | NJMEP South, 211 Benigno Blvd, Bellmawr, NJ, 08031, United States
Implementing lean principles are extremely beneficial for manufacturing companies. The elimination of waste (muda), continuous improvement (kaizen) as well as pull-systems (kanban) will be illustrated in live demonstrations for practical, comprehensible knowledge of Lean Manufacturing.
Lean Manufacturing training is based on principals that can be implemented and will become the strong foundation of your organization and employees.
Objectives
Basic Concepts of Lean Manufacturing – Elimination of Waste
Overproduction Overproduction
Waste of Unnecessary Motion
Waste of Inventory
Production of Defects
Waste of Waiting
Waste of Transportation
Waste of Over Processing
Live Demonstration of the Tools and Methodology Necessary to Implement “Lean” on the Shop Floor
Understanding of non-value added activities in manufacturing
Learn how to improve productivity by:
applying standard work
using visual controls
set-up reduction
batch size reduction
point-of-use storage
quality at the source
pull systems

Cyber Security Awareness – Protect Your Business
2023-01-12 11:00 - 12:00 (America/New_York) | Online
Cyber Security Awareness – Protect Your Business
Cyber Security is a daunting task. More and more money and time is being spent every year on protecting American business but every day we hear about another major company getting hacked, a new vulnerability that we need to guard against, a new solution that will solve all our problems, etc..
So, what can you do to cut through all the noise?
This NJMEP webinar will not have all the answers or address all your concerns but the 1 hour session will provide you with real take always that you may implement in your business that will include:
• Important cyber risk lessons that we have learned that you can apply to your business
• Non-negotiable, best practices that you need to apply in your business!
• How to address the key threats of remote workers

OSHA 10-Hour Card Training
2023-01-17 08:00 - 17:00 (America/New_York) | NJMEP South, 211 Benigno Blvd, Bellmawr, NJ, 08031, United States
3/9/23 + 3/10/23
8:30AM – 5:00PM + 8:30AM – 12:30PM
OSHA is the Occupational Safety and Health Administration and is responsible for worker safety and health protection.
Since its inception in 1970, OSHA has cut the work-fatality rate by more than half, reduced the overall injury and illness rates in industries where OSHA has concentrated its attention, virtually eliminated brown lung disease in the textile industry and reduced trenching and excavation fatalities by 35 percent.
OSHA is administered through the Department of Labor (DOL). The DOL regulates and enforces more than 180 federal laws. These mandates and the regulations that implement them cover many workplace activities for about 10 million employers and 125 million workers.
OSHA 10-hour training is the primary method used to train workers on hazard recognition and OSHA safety standards. The OSHA 10-hour course for the general industry is for workers who have jobs related to health care, electrical, factory, warehouse, manufacturing, storage and more. This OSHA course covers general industry hazards not specific to those working construction-only jobs. Our OSHA 10-Hour Training course is designed to teach workplace safety and reduce jobsite hazards. Workers will learn about hazard avoidance, workers’ rights, filing an OSHA Complaint and more.
With successful completion of the class, participants receive an OSHA construction safety and health 10- hour course completion card.

Microsoft Word Fundamentals - Live North
2023-01-17 08:30 - 17:00 (America/New_York) | NJ
Microsoft® Word is designed to help you move smoothly through the task of creating professional-looking documents. Its rich features and powerful tools can make your work easy, and even fun. In this course, you’ll learn how to use Word to create and edit simple documents; format documents; add tables and lists; add design elements and layout options; and proof documents. You can also use this course to prepare for the Microsoft Office Specialist (MOS) Certification exams for Microsoft Word.
Course Content:
Lesson 1: Getting Started with Word
Topic A: Identify the Word Interface
Topic B: Create a Word Document
Topic C: Help

Lesson 2: Editing a Document
Topic A: Navigate and Select Text
Topic B: Modify Text
Topic C: Find and Replace Text

Lesson 3: Formatting Text and Paragraphs
Topic A: Apply Character Formatting
Topic B: Align Text Using Tabs
Topic C: Display Text as List Items
Topic D: Control Paragraph Layout
Topic E: Apply Borders and Shading
Topic F: Apply Styles
Topic G: Manage Formatting

Lesson 4: Adding Tables
Topic A: Insert a Table
Topic B: Modify a Table
Topic C: Format a Table
Topic D: Convert Text to a Table

Lesson 5: Managing Lists
Topic A: Sort a List
Topic B: Renumber a List
Topic C: Customize a List

Lesson 6: Inserting Graphic Objects
Topic A: Insert Symbols and Special Characters
Topic B: Add Images to a Document

Lesson 7: Controlling Page Appearance
Topic A: Apply a Page Border and Color
Topic B: Add a Watermark
Topic C: Add Headers and Footers
Topic D: Control Page Layout

Lesson 8: Proofing a Document
Topic A: Check Spelling and Grammar
Topic B: Other Proofing Tools
Topic C: Check Accessibility

Lesson 9: Customizing the Word Environment
Topic A: Customize the Word Interface
Topic B: Additional Save Options

Virtual - How to Secure Tax Credits & Incentives; R&D
2023-01-17 09:00 - 10:00 (America/New_York) | Online
